franciscovallarta

22.858

hace 6 años

Old model does not help, specify the model or comment the chassis number.

tecnico54

22.006

hace 6 años

the chassis number where I locate it

Victor E

65.783

hace 6 años

Did you measure the voltage of + b in the secondary of the source?

tecnico54

22.006

hace 6 años

I measured the large capacitor of the source and measured 321 vol dc

tecnico54

22.006

hace 6 años

where I place the + b

Victor E

65.783

hace 6 años

in the secondary of the source, it is the tension that feeds the flyback.

tecnico54

22.006

hace 6 años

I measured the flayback's legs and it doesn't mark anything

tecnico54

22.006

hace 6 años

what voltage should the flayback legs have? and if it is dc or ac

Victor E

65.783

hace 6 años

the flyback pins are not measured and less when the TV is on, for the love of his tester I tell him. The union of capacitor 2531 and coil 5531 there is the + b that goes to the flyback, 95 volts must measure DC or DC continuous voltage

tecnico54

22.006

hace 6 años

I measured the capacitor 2531 and measured 113 vol dc

tecnico54

22.006

hace 6 años

The capacitor that measured with the number 2531 is near the flayback at a 5 centimeter and there is a 5431 coil at 1 centimeter of the flayback legs are those ???

Victor E

65.783

hace 6 años

Midio the coil that np is open?

tecnico54

22.006

hace 6 años

It is not open

Victor E

65.783

hace 6 años

Then the clyback has continuous voltage, 116v said?. If the LED is on and does not start, it is in stand-by.

tecnico54

22.006

hace 6 años

the flayback has a coil there should be how many volts ???

Victor E

65.783

hace 6 años

That capacitor and that coil connect to the flyback, I think it is pin 2 the input of + b

tecnico54

22.006

hace 6 años

the capacitor measures 113 vol dc if I measure a leg of that capacitor with pin 2 of the flayback I don't care 113 vol dc

Victor E

65.783

hace 6 años

That tv is in stand-by, you will have to search because it does not start. It will cost you to repair it.

tecnico54

22.006

hace 6 años

if it is in stand by just turn on the led

Victor E

65.783

hace 6 años

Do I press the channel key on the front of the TV or power on the remote to see if it starts?

tecnico54

22.006

hace 6 años

jjajajajajajajajja there I start thank you friendooooooooo you passed