⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

TVs

Modify Led tv board voltage difference in T-Con 5v and 12v

P2016

158

hace 6 años

Good afternoon, this query is in relation to the previous one. I have a TP.MS6306.P65 board removed from a 24 "full hd tv. The board can be adapted without problems to the frame, keypad, ir sensor, speakers etc. of a 40 "Full HD LED TV with lightning burned plate. The question is the following, the pins match on the TCon boards, the lvds cable must not be modified. The problem is that the board delivers 5v to the TCon and I need 12v for the 40 "display. Is it possible that if I took the 12v from somewhere else to power the TCon, it could work with this board? Thanks to everyone beforehand

Comentar

franciscovallarta

22.858

hace 6 años

I must work with 12v from another point or external .... greetings.

Comentar

P2016

158

hace 6 años

I thought the same, my question is if there were any other parameters to consider. I will try then.
Any recommendations to get the 12v from the board itself? There is a free connector, listed as CNB2. I don't know its function and I don't have a diagram, but being free I don't think there is any problem



Responder

P2016

158

hace 6 años

Indeed there is no problem. You can take the 12v from elsewhere. The TP.MS6306.P65 board delivered 5v for the TCon and I took the 12v of the free CNB2 connector. Works correctly

Comentar