⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

TVs

Panasonic TC-L42U5X Screen Damaged Source

Televisor Panasonic TC-L42U5X

Fernando Barillas Corona

2.638

hace 6 años

Greetings to the comrades of the community, because on this occasion I require your help to repair the source of this screen, and look for the diagram but did not find it, the screen does not turn on because the source is damaged, by damaged elements which do not we can see the number of parts per burn, which are as follows: Transistor QM1, resistors RM7, RM9, RM10, Diode DM1, if they were so kind of someone to give me the values of these elements, I thank you in advance for your valuable help to get ahead this fault, thank you and have good repairs.

Comentar

Manual de servicio

3.24Mb

geogrow

875

hace 6 años

Put photo of the power board or in my absence tell us what model you put on the plate ....

Comentar

Fernando Barillas Corona

2.638

hace 6 años

Thank you very much for responding, the model of the plate is B179-101 hope they can help me, thanks

Comentar

gilar

6.594

hace 6 años

Your source is a Darfon and indeed, there is no diagram



Responder



gilar

6.594

hace 6 años



hace 6 años

I did not read your query, it is a mess because there is not a sequence of queries as the requests arrive, well until we taste last, here I leave what you request as to the diode I am not sure if it is 1 or L, if you need the image of the dude I'll upload it and your pordas decide ... greetings QM1 = P8NK80ZFP RM7 = 22R0 = .22 RM9 = 10R0 = 10 ohms RM10 = 1002 = 10 K DM1 = A1

Comentar

Fernando Barillas Corona

2.638

hace 6 años

Many thanks Gilar for responding, and if it is a mess as you say to follow up the question but hey, apologies regarding the diode you do not know if it is a normal or special diode, could you put a 1N4748? or what you can ask, with which nomenclature given that is a smd logic, or what features you will have to ask for something similar to have if you have left, agradesco much your help and try to repair this card if not then I will have to buy it.



Responder

gilar

6.594

hace 6 años

1n 4148 or a joke! , the diode is connected to the fet therefore you will not support the switching speed, if you have waste sources locate a similar section that has diode and test ... greetings



Responder