good, I have a tv-monitor brand hyundai model hlcd-2200 the same I left to turn on, connect the cable to the network and turn on a led on the source I measure the output voltage and it is correct 12v
https://ibb.co/mj3euk
but when connecting the source to the TV and giving the power button the monitor does not turn on and the LED on the source starts flashing. The LED below the screen does not turn on. is then when I proceed to check the plate of the same and I notice that everything is good to the naked eye but I find a component that give me continuity as if it were short
https://ibb.co/kWwcfQ
prosedo to desolder it and see if it continues giving continuity because I think it is a diode and if it turns out that if there is continuity, then it would be a question of replacing and testing but here comes the question, the "diode" does not have numeration so I would not know for which replace it and in the union of the metal and the black part of the "diode" there is as a plastic union that is not own or that I have not seen in the diodes. Anyone know what component it is? and is it normal for continuity?
https://ibb.co/bOWUAQ
please copy and paste the links that I did not find how to modify them