bsc25 n812 flyback replacement

gregorio suarez

4

hace 8 años

Greetings, I have the flyback bsc27 t1051a, I take it from a plate that has the same configuration of pins, as I observed the plate, the tv lights with this flyback but it is very reduced of the sludge, without video, my question is, it will be compatible

Comentar

TecnoHogar

7.142

hace 8 años

Check if the flyback code is correct. On the other hand say what TV we talk about



Responder

Joansoler

47.894

hace 8 años

To see, there are FBTs designed to be used in generic or universal chassis of varying size. For proper adjustment of the horizontal width, there are some shunts (2 to 4) of the primary winding or coil. In that sense, it would be advisable to list us with your pins and the function you perform. However, usually the red wire of the yoke, which corresponds to the horizontal section is connected, together with the collector of the TSH or HOT, to the pin called COL or HV of the FBT (Fly Back Transformer), but in the generic Chassis when the width is not desired (reduction or excess), that red wire is no longer connected next to the TSH collector but separately, to those 2 or 4 additional pins that the FBT has available, until approaching the required horizontal width and the fine adjustment is performed from the Service Mode. For example, in the image of this FBT: BSC25-T1010A , the COL or HV pin is as HOT and those additional pins are described as "TEP" ... In this other image, COL appears as H and additional pins like H1, H2, H3 and H4 ... [i] Greetings! Joansoler. [/I]

Comentar

gregorio suarez

4

hace 8 años

Greetings joansoler, the pins is the same configuration of the flyback BSC25-T1010A, it is more according to the information that I got this flyback T1010 would be indicated, but not achieved



Responder

Joansoler

47.894

hace 8 años

In the subject treated in this link ... http://www.tecnicosaurios.com/foro/viewtopic.php?f=3&t=30488
it is mentioned that there is equivalence between these FBTs: BSC27-T1050A, BSC25-05N2158A, BSC25-T1010A and BSC24-01N4014K



Responder

TecnoHogar

7.142

hace 8 años

If you do not get that: Hello, the fly-back BSC25T1010A is → HR80362. without modification with these BSC24-01N4014K BSC25-T1010A BSC25-N0832 BSC25-N0435 http://www.sofmel.com.ar/Catalogo/Flybacks%20-%20Electronica%20Sofmel.pdf

Comentar

gregorio suarez

4

hace 8 años

well they are difficult to get, will someone know how to adapt the one I have?



Responder

bsc25 n812 flyback replacement

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

Curso Diseño de Amplificadores de Máxima Fidelidad

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Curso Tecnología Inverter - Fabricación de probadores y herramientas