Hi everyone. I have a VIT model LCD monitor I don't remember I can't get it now. but it is a monitor of about 15 "more or less. square, not panoramic. It turns out that suddenly began to fail, showing the screen with crossed lines badly and disappearing the image until it was completely black, type off but with the power LED in orange, as if it were without signal, disassemble it to verify what the problem was , and I found myself with inflated electrolytic capacitors. 3 in total. 1 of 1000mf x 25v and 2 of 680mf x 25. I want to replace them but I only get 1000mf x 25v. They also told me in the electronic store before, that 680mf is not a commercial measure. My question is: I can replace the 2 of 680mf x 25v with 1000mf x 25v. ? then there would be 3 capacitors of 1000mf x 25v there would be some secutaneous effect on this. regards