hace 6 años
Hello Friend. Check the pinions that the motor has that makes the optics slide that pinion is known to open as busted almost not severely but if you use a magnifying glass you can see it, and check the engine to open if it has 10 or 11 ohms. if it has less, it can give you that fault and grease may be missing in the rails where the lasser optician runs. regards
¿Realmente quieres cerrar esta reparación?
Sí
No
¿Realmente quieres reabrir esta reparación?
Sí
No
¿Realmente quieres borrar este post?
Sí
No