Thanks franciscovallarta.
Although in the manual (I already downloaded it, thank you) the position does not look very good if it says that it is 3 belts then it must be the same as you put in my photo because the pulley number 4 is double. I can do the test with some normal leagues, and if everything works fine, look to see if they are achieved (which is the most difficult thing now here in Vzla.).
Actually I am not a technician but I have changed some of those belts to some other device of mine.
I give you a like .... Thanks again!
Thanks franciscovallarta.
Yes, it must be as you say because although in the manual (I already downloaded it, thanks) the pulley No. 4 is not very good, it is double.
I am going to try some normal leagues to see if it works, and if so, I will see if I can get them (which is the difficult thing here in Vzla.)
Thanks again and I like you.
Francisco is correct. I tried with some office liguitas and everything works perfectly ....... Thank you very much and I'm going to click on "It's the best solution"
Thanks Kastell but if you see my picture there are 6 pulleys in total that I listed them, and the No. 4 in my photo is double, that is to say, it is really as franciscovallarta says.
It may be, the good thing would be to get original and complete Service Manual where it comes to the position and complete list, this scheme that has facilitated, Francisco Vallarta is a photocopy and missing sheets, precisely those of belt position.
In the absence of an original scheme, sharpen your wits and take samples with a rope. Luck.
Francisco's scheme is correct. I tried a few simple office bands (bands or rubber bands) and the VHS works perfectly:
Thank you very much Kastell for your intervention and advice.
I am glad that you have already solved it, have sent the complete scheme and I keep saying that it has 2 straps look at page 68 and see them
Some things are, the pulleys that carry a lot and another are the transmission belts, "eye" (motor) load of guides tape position. of tape.