⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Balances

Supplement to my cable configuration question

Gocu

hace 6 años

this is the control is a model IC 130 of COBACOR

this is the photo of the card now as interpreted which goes in each pin

Comentar

Gocu

hace 6 años

But the load cell goes to a connector that has 5 pins there as I put them



Responder

enrique fernandez

3.661

hace 6 años

the cables of the card go to a connector where the pins are numbered, which is attached to the connector to which the terminals that have the numbered pins were also broken, if the indicator connector has the red wire to pin 1 the red wire of the cell goes to pin 1 of the connector from which the wires were broken.



Responder



enrique fernandez

3.661

hace 6 años



hace 6 años

match the color of the card cables with the load cell cables, red with red, black with black, green with green, and white with white comment how it went

Comentar

Gocu

hace 6 años

Thank you very much Enrique for your help I was very useful I did what you told me to uncover the control and solder the wires on the pins color with color and it already worked then I send you the photo how it finally looked
Regards



Responder